把装逼进行到底！提高生活质量，多用键盘，不买鼠标！
我的vimrc插件大致如下： c/c++查找 ctags(一般自带) +cscope 函数提示 echofunc 窗口 taglist + WinManager + quickfix(一般自带) + nerdtree + MiniBufExplorer 智能补全 supertab + omnicppcomplete 画图 drawit + sketch 没装上 vimgdb
--------------------------------------------------------------------------------------------------------------------------
配置文件夹在 ，
即我的帐号下载栏目叫：coolulu的vim插件配置文件夹（我的WinManager插件的目录栏是在右边的）
我的vimrc
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" Copycat: lulu" Version: 3.2.3" Install: 在linux和windows下无需改动配置文件的内容,对应配置文件夹是vim_3" 在linux下在 ~/ 目录下,配置文件名改成 .vimrc,路径为 ~/.vimrc" 配置文件夹名改成 .vim,路径为 ~/.vim" 在windows下在 $(vim)/ 目录下,配置文件名改成 _vimrc,路径为 Vim/_vimrc" 配置文件夹名改成 vimfiles,路径为 Vim/vimfiles" NoBugs: windows下 taglist使用有问题已修复" Time: 2012.8.3""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" 文本格式和排版"set formatoptions=tcrqn " 自动格式化set autoindent " 继承前一行的缩进方式，特别适用于多行注释set smartindent " 为C程序提供自动缩进set cindent " 使用C样式的缩进set smarttab " 在行和段开始处使用制表符"set tabstop=4 " 制表符为4"set softtabstop=4 " 统一缩进为4"set shiftwidth=4"set noexpandtab " 不要用空格代替制表符"set nowrap " 不要换行"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" 搜索和匹配 "set showmatch " 高亮显示匹配的括号set matchtime=5 " 匹配括号高亮的时间（单位是十分之一秒）set scrolloff=10 " 光标移动到buffer的顶部和底部时保持10行距离set novisualbell " 不要闪烁set hlsearch " 高亮搜索set nowrapscan " 查找到文件头或文件尾时停止"set incsearch " 边输入边查找"set laststatus=2 " 总是显示状态行"set ignorecase " 在搜索的时候忽略大小写"set statusline=%F%m%r%h%w\[POS=%l,%v][%p%%]\%{strftime(\”%d/%m/%y\ -\ %H:%M\”)} " 我的状态行显示的内容（包括文件类型和解码）"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" 文件设置"set shortmess=atI " 启动的时候不显示那个援助索马里儿童的提示`set report=0 " 通过使用: commands命令，告诉我们文件的哪一行被改变过set noerrorbells " 不让vim发出讨厌的滴滴声set fillchars=vert:\ ,stl:\ " 在被分割的窗口间显示空白，便于阅读 ,stlnc:\(加了这个wm分割兰有\\\\\\\\\\\\\)set mouse=a " 可以在buffer的任何地方使用鼠标（类似office中在工作区双击鼠标定位）set selection=exclusiveset selectmode=mouse,key"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" 一般设置"set viminfo+=! " 保存全局变量set history=300 " history文件中需要记录的行数set nocompatible " 不要使用vi的键盘模式，而是vim自己的set foldmethod=syntaxset foldlevel=100 " 启动vim时不要自动折叠代码set nuset fileencodings=utf-8,gbkset rulerset showmatch " 高亮显示匹配的括号 filetype on " 侦测文件类型 set nobackup " 不要备份文件（根据自己需要取舍） "set backupsyntax enablesyntax on " 语法高亮 set magic " 设置正表达式set backspace=indent,eol,start " 这指明在插入模式下在哪里允许 删除光标前面的字符。 " 逗号分隔的三个值分别指：行首的空白字符，换行符和插入模式开始处之前的字符。set showcmd " 在 Vim 窗口右下角，标尺的右边显示未完成的命令" :inoremap ( () i" :inoremap { { } O" :inoremap [ [] i" :inoremap " "" i" :inoremap ' '' i"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" GUI"if has("gui_running") " 如果是图形界面 set guioptions=m " 关闭菜单栏 set guioptions=t " 关闭工具栏" set guioptions=L " 启动左边的滚动条" set guioptions+=r " 启动右边的滚动条" set guioptions+=b " 启动下边的滚动条 set clipboard+=unnamed " 共享剪贴板 if has("win32") colorscheme torte " torte配色方案 set guifont=Consolas:h11 " 字体和大小 endifendif """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" taglist "let Tlist_Use_Right_Window = 0 " 在左侧显示窗口let Tlist_Compart_Format = 1 " 压缩方式let Tlist_Exist_OnlyWindow = 1 " 如果只有一个buffer，kill窗口也kill掉bufferlet Tlist_File_Fold_Auto_Close = 0 " 不要关闭其他文件的tagslet Tlist_Enable_Fold_Column = 0 " 不要显示折叠树 (鼠标可以点开)nmap tl :Tlist if has("win32") let Tlist_Ctags_Cmd = ' ctags' "windows下必须空3个字符,否则解析成gs else let Tlist_Ctags_Cmd = '/usr/bin/ctags'endif"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" netrw"let g:netrw_winsize = 35nmap fe :Sexplore! """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" winmanager "let g:winManagerWindowLayout='NERDTree|BufExplorer'"let g:winManagerWindowLayout = 'FileExplorer|TagList'"let g:winManagerWindowLayout = 'FileExplorer'let g:winManagerWidth = 35let g:defaultExplorer = 0nmap wm :WMToggle nmap :FirstExplorerWindow nmap :BottomExplorerWindow autocmd BufWinEnter \[Buf\ List\] setl nonumber"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" omnicppcomplete"set nocpfiletype plugin onlet OmniCpp_DefaultNamespaces = ["std"] "下面的设置用于当用户预先声明namespace时也能自动补全代码（如使用using std::string） "if has("win32") " 设置代码提示窗口的颜色（默认为粉红色) " highlight Pmenu ctermbg=13 guibg=LightGray " highlight PmenuSel ctermbg=7 guibg=DarkBlue guifg=White " highlight PmenuSbar ctermbg=7 guibg=DarkGray " highlight PmenuThumb guibg=Black"endif"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" minibufexpl"let g:miniBufExplMapWindowNavVim = 1 let g:miniBufExplMapWindowNavArrows = 1 let g:miniBufExplMapCTabSwitchBufs = 1 let g:miniBufExplModSelTarget = 1 "let g:miniBufExplorerMoreThanOne=1 "自动打开"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" cscope"if has("cscope") set csto=0 set cst set nocsverb if filereadable("cscope.out") " add any database in current directory cs add cscope.out elseif $CSCOPE_DB != "" " else add database pointed to by environment cs add $CSCOPE_DB endif set csverb " 这个必须放在后面,不然windows上找不到cscope.outendifnmap s :cs find s =expand(" ") :cw nmap g :cs find g =expand(" ") :cw nmap c :cs find c =expand(" ") :cw nmap t :cs find t =expand(" ") :cw nmap e :cs find e =expand(" ") :cw nmap f :cs find f =expand(" ") :cw nmap i :cs find i ^ =expand(" ") $ :cw nmap d :cs find d =expand(" ") :cw "nmap s :cs find s =expand(" ") "nmap g :cs find g =expand(" ") "nmap c :cs find c =expand(" ") "nmap t :cs find t =expand(" ") "nmap e :cs find e =expand(" ") "nmap f :cs find f =expand(" ") "nmap i :cs find i ^ =expand(" ") $ "nmap d :cs find d =expand(" ") " Using 'CTRL-spacebar' then a search type makes the vim window" split horizontally, with search result displayed in" the new window. nmap s :scs find s =expand(" ") nmap g :scs find g =expand(" ") nmap c :scs find c =expand(" ") nmap t :scs find t =expand(" ") nmap e :scs find e =expand(" ") nmap f :scs find f =expand(" ") nmap i :scs find i ^ =expand(" ") $ nmap d :scs find d =expand(" ") " Hitting CTRL-space *twice* before the search type does a vertical" split instead of a horizontal one nmap s \:vert scs find s =expand(" ") nmap g \:vert scs find g =expand(" ") nmap c \:vert scs find c =expand(" ") nmap t \:vert scs find t =expand(" ") nmap e \:vert scs find e =expand(" ") nmap i \:vert scs find i ^ =expand(" ") $ nmap d \:vert scs find d =expand(" ") """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
使用时：
文件代码很多时输入：
生成索引 ！ctags -R --fields=+lS --c++-kinds=+p --fields=+iaS --extra=+q (echofunc) (omnicppcomplete) ！cscope -Rbkq
-------------------------------------------------------------------------------------------------------------------------------------
windows下的 把
ctags.exe,
cscope.exe, curses2.dll, regex2.dll 放到 $(vim)\vim73
还有windows的cscope 不支持 -q选项
---------------------------------------------------------------------------
GVIM(1) VIM(1)NAME vim - Vi IMproved, a programmers text editorSYNOPSIS vim [options] [file ..] vim [options] - vim [options] -t tag vim [options] -q [errorfile] ex view gvim gview evim eview rvim rview rgvim rgviewDESCRIPTION Vim is a text editor that is upwards compatible to Vi. It can be used to edit all kinds of plain text. It is especially useful for editing programs. There are a lot of enhancements above Vi: multi level undo, multi win‐ dows and buffers, syntax highlighting, command line editing, filename completion, on-line help, visual selection, etc.. See ":help vi_diff.txt" for a summary of the differences between Vim and Vi. While running Vim a lot of help can be obtained from the on-line help system, with the ":help" command. See the ON-LINE HELP section below. Most often Vim is started to edit a single file with the command vim file More generally Vim is started with: vim [options] [filelist] If the filelist is missing, the editor will start with an empty buffer. Otherwise exactly one out of the following four may be used to choose one or more files to be edited. file .. A list of filenames. The first one will be the current file and read into the buffer. The cursor will be posi‐ tioned on the first line of the buffer. You can get to the other files with the ":next" command. To edit a file that starts with a dash, precede the filelist with "--". - The file to edit is read from stdin. Commands are read from stderr, which should be a tty. -t {tag} The file to edit and the initial cursor position depends on a "tag", a sort of goto label. {tag} is looked up in the tags file, the associated file becomes the current file and the associated command is executed. Mostly this is used for C programs, in which case {tag} could be a function name. The effect is that the file containing that function becomes the current file and the cursor is positioned on the start of the function. See ":help tag-commands". -q [errorfile] Start in quickFix mode. The file [errorfile] is read and the first error is displayed. If [errorfile] is omitted, the filename is obtained from the 'errorfile' option (defaults to "AztecC.Err" for the Amiga, "errors.err" on other systems). Further errors can be jumped to with the ":cn" command. See ":help quickfix". Vim behaves differently, depending on the name of the command (the exe‐ cutable may still be the same file). vim The "normal" way, everything is default. ex Start in Ex mode. Go to Normal mode with the ":vi" command. Can also be done with the "-e" argument. view Start in read-only mode. You will be protected from writing the files. Can also be done with the "-R" argument. gvim gview The GUI version. Starts a new window. Can also be done with the "-g" argument. evim eview The GUI version in easy mode. Starts a new window. Can also be done with the "-y" argument. rvim rview rgvim rgview Like the above, but with restrictions. It will not be possi‐ ble to start shell commands, or suspend Vim. Can also be done with the "-Z" argument.OPTIONS The options may be given in any order, before or after filenames. Options without an argument can be combined after a single dash. +[num] For the first file the cursor will be positioned on line "num". If "num" is missing, the cursor will be positioned on the last line. +/{pat} For the first file the cursor will be positioned on the first occurrence of {pat}. See ":help search-pattern" for the available search patterns. +{command} -c {command} {command} will be executed after the first file has been read. {command} is interpreted as an Ex command. If the {command} contains spaces it must be enclosed in double quotes (this depends on the shell that is used). Example: Vim "+set si" main.c Note: You can use up to 10 "+" or "-c" commands. -S {file} {file} will be sourced after the first file has been read. This is equivalent to -c "source {file}". {file} cannot start with '-'. If {file} is omitted "Session.vim" is used (only works when -S is the last argument). --cmd {command} Like using "-c", but the command is executed just before processing any vimrc file. You can use up to 10 of these commands, independently from "-c" commands. -A If Vim has been compiled with ARABIC support for editing right-to-left oriented files and Arabic keyboard mapping, this option starts Vim in Arabic mode, i.e. 'arabic' is set. Otherwise an error message is given and Vim aborts. -b Binary mode. A few options will be set that makes it pos‐ sible to edit a binary or executable file. -C Compatible. Set the 'compatible' option. This will make Vim behave mostly like Vi, even though a .vimrc file exists. -d Start in diff mode. There should be two, three or four file name arguments. Vim will open all the files and show differences between them. Works like vimdiff(1). -d {device} Open {device} for use as a terminal. Only on the Amiga. Example: "-d con:20/30/600/150". -D Debugging. Go to debugging mode when executing the first command from a script. -e Start Vim in Ex mode, just like the executable was called "ex". -E Start Vim in improved Ex mode, just like the executable was called "exim". -f Foreground. For the GUI version, Vim will not fork and detach from the shell it was started in. On the Amiga, Vim is not restarted to open a new window. This option should be used when Vim is executed by a program that will wait for the edit session to finish (e.g. mail). On the Amiga the ":sh" and ":!" commands will not work. --nofork Foreground. For the GUI version, Vim will not fork and detach from the shell it was started in. -F If Vim has been compiled with FKMAP support for editing right-to-left oriented files and Farsi keyboard mapping, this option starts Vim in Farsi mode, i.e. 'fkmap' and 'rightleft' are set. Otherwise an error message is given and Vim aborts. -g If Vim has been compiled with GUI support, this option enables the GUI. If no GUI support was compiled in, an error message is given and Vim aborts. -h Give a bit of help about the command line arguments and options. After this Vim exits. -H If Vim has been compiled with RIGHTLEFT support for editing right-to-left oriented files and Hebrew keyboard mapping, this option starts Vim in Hebrew mode, i.e. 'hkmap' and 'rightleft' are set. Otherwise an error message is given and Vim aborts. -i {viminfo} When using the viminfo file is enabled, this option sets the filename to use, instead of the default "~/.viminfo". This can also be used to skip the use of the .viminfo file, by giving the name "NONE". -L Same as -r. -l Lisp mode. Sets the 'lisp' and 'showmatch' options on. -m Modifying files is disabled. Resets the 'write' option. You can still modify the buffer, but writing a file is not possible. -M Modifications not allowed. The 'modifiable' and 'write' options will be unset, so that changes are not allowed and files can not be written. Note that these options can be set to enable making modifications. -N No-compatible mode. Reset the 'compatible' option. This will make Vim behave a bit better, but less Vi compatible, even though a .vimrc file does not exist. -n No swap file will be used. Recovery after a crash will be impossible. Handy if you want to edit a file on a very slow medium (e.g. floppy). Can also be done with ":set uc=0". Can be undone with ":set uc=200". -nb Become an editor server for NetBeans. See the docs for details. -o[N] Open N windows stacked. When N is omitted, open one window for each file. -O[N] Open N windows side by side. When N is omitted, open one window for each file. -p[N] Open N tab pages. When N is omitted, open one tab page for each file. -R Read-only mode. The 'readonly' option will be set. You can still edit the buffer, but will be prevented from acci‐ dently overwriting a file. If you do want to overwrite a file, add an exclamation mark to the Ex command, as in ":w!". The -R option also implies the -n option (see below). The 'readonly' option can be reset with ":set noro". See ":help 'readonly'". -r List swap files, with information about using them for recovery. -r {file} Recovery mode. The swap file is used to recover a crashed editing session. The swap file is a file with the same filename as the text file with ".swp" appended. See ":help recovery". -s Silent mode. Only when started as "Ex" or when the "-e" option was given before the "-s" option. -s {scriptin} The script file {scriptin} is read. The characters in the file are interpreted as if you had typed them. The same can be done with the command ":source! {scriptin}". If the end of the file is reached before the editor exits, further characters are read from the keyboard. -T {terminal} Tells Vim the name of the terminal you are using. Only required when the automatic way doesn't work. Should be a terminal known to Vim (builtin) or defined in the termcap or terminfo file. -u {vimrc} Use the commands in the file {vimrc} for initializations. All the other initializations are skipped. Use this to edit a special kind of files. It can also be used to skip all initializations by giving the name "NONE". See ":help initialization" within vim for more details. -U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa‐ tions. All the other GUI initializations are skipped. It can also be used to skip all GUI initializations by giving the name "NONE". See ":help gui-init" within vim for more details. -V[N] Verbose. Give messages about which files are sourced and for reading and writing a viminfo file. The optional num‐ ber N is the value for 'verbose'. Default is 10. -v Start Vim in Vi mode, just like the executable was called "vi". This only has effect when the executable is called "ex". -w {scriptout} All the characters that you type are recorded in the file {scriptout}, until you exit Vim. This is useful if you want to create a script file to be used with "vim -s" or ":source!". If the {scriptout} file exists, characters are appended. -W {scriptout} Like -w, but an existing file is overwritten. -x Use encryption when writing files. Will prompt for a crypt key. -X Don't connect to the X server. Shortens startup time in a terminal, but the window title and clipboard will not be used. -y Start Vim in easy mode, just like the executable was called "evim" or "eview". Makes Vim behave like a click-and-type editor. -Z Restricted mode. Works like the executable starts with "r". -- Denotes the end of the options. Arguments after this will be handled as a file name. This can be used to edit a filename that starts with a '-'. --echo-wid GTK GUI only: Echo the Window ID on stdout. --help Give a help message and exit, just like "-h". --literal Take file name arguments literally, do not expand wild‐ cards. This has no effect on Unix where the shell expands wildcards. --noplugin Skip loading plugins. Implied by -u NONE. --remote Connect to a Vim server and make it edit the files given in the rest of the arguments. If no server is found a warning is given and the files are edited in the current Vim. --remote-expr {expr} Connect to a Vim server, evaluate {expr} in it and print the result on stdout. --remote-send {keys} Connect to a Vim server and send {keys} to it. --remote-silent As --remote, but without the warning when no server is found. --remote-wait As --remote, but Vim does not exit until the files have been edited. --remote-wait-silent As --remote-wait, but without the warning when no server is found. --serverlist List the names of all Vim servers that can be found. --servername {name} Use {name} as the server name. Used for the current Vim, unless used with a --remote argument, then it's the name of the server to connect to. --socketid {id} GTK GUI only: Use the GtkPlug mechanism to run gvim in another window. --version Print version information and exit.ON-LINE HELP Type ":help" in Vim to get started. Type ":help subject" to get help on a specific subject. For example: ":help ZZ" to get help for the "ZZ" command. Use and CTRL-D to complete subjects (":help cmd‐ line-completion"). Tags are present to jump from one place to another (sort of hypertext links, see ":help"). All documentation files can be viewed in this way, for example ":help syntax.txt".FILES /usr/share/vim/vim73/doc/*.txt The Vim documentation files. Use ":help doc-file-list" to get the complete list. /usr/share/vim/vim73/doc/tags The tags file used for finding information in the docu‐ mentation files. /usr/share/vim/vim73/syntax/syntax.vim System wide syntax initializations. /usr/share/vim/vim73/syntax/*.vim Syntax files for various languages. /usr/share/vim/vimrc System wide Vim initializations. ~/.vimrc Your personal Vim initializations. /usr/share/vim/gvimrc System wide gvim initializations. ~/.gvimrc Your personal gvim initializations. /usr/share/vim/vim73/optwin.vim Script used for the ":options" command, a nice way to view and set options. /usr/share/vim/vim73/menu.vim System wide menu initializations for gvim. /usr/share/vim/vim73/bugreport.vim Script to generate a bug report. See ":help bugs". /usr/share/vim/vim73/filetype.vim Script to detect the type of a file by its name. See ":help 'filetype'". /usr/share/vim/vim73/scripts.vim Script to detect the type of a file by its contents. See ":help 'filetype'". /usr/share/vim/vim73/print/*.ps Files used for PostScript printing. For recent info read the VIM home page: